Brother laser printers are black-only on many models, so the black, gray and detail sections matter most there; for a full check of a mono laser, the Black and White Test Page is a better fit. Brother inkjets have a built-in Print Quality Check sheet, described below.
How to print it
- Pick the paper size above, and add the printer name and date if you want to keep the printout.
- Click Print test page (or Download PDF and open it).
- In the print dialog, choose your printer and set the scale to 100% or Actual size.Use plain paper unless you are testing photo paper.
How to read the printout
- Solid colors
- Each block should be one even color. A missing block points to an empty cartridge or clogged nozzles in that ink; thin white lines across a block are clogged nozzles.
- Gradients
- Each strip should fade smoothly from white to full color. Visible steps or bands usually mean a low print-quality setting or a print head that needs cleaning.
- Gray steps
- All 11 steps should look different. If the dark steps merge into black, the printer is printing too dark; if the first steps disappear, too light.
- Detail
- The star should stay sharp until close to the center, the 0.1 pt line should be visible and the 4 pt text readable with a magnifier.
- Large areas
- Large blocks show streaks, banding and uneven density that small swatches hide.
- Size and border
- The rulers should match a real ruler exactly, and the border should sit 0.5 in (12.7 mm) from every edge.
Print Brother’s built-in check sheet
- Inkjet with a touchscreen: Ink (or Settings) → Improve Print Quality → Check Print Quality, then follow the prompts.
- Laser printers: Menu or Settings → Machine Info (or Print Reports) → Printer Settings or Test Print.
- On Windows 11 you can also print the built-in Windows test page: Settings → Bluetooth & devices → Printers & scanners → choose your printer → Print test page.
Menu names vary between Brother models; your model’s online user guide lists the exact path.
Something wrong on your print?
Tap the problem you see for the usual causes and what to try.
Nothing prints at all
Usual causes: The job is stuck in the queue, the computer is sending to a different (often offline) printer, or the printer is not connected.
- Check that the printer you picked in the print dialog is the right one and shows as online.
- Clear the print queue, then turn the printer off and on.
- On Wi-Fi printers, make sure the printer and computer are on the same network; print the printer’s own network report from its menu.
- If the printer prints its built-in test page but not from the computer, reinstall the driver or re-add the printer.
A color is missing or looks wrong
Usual causes: Empty or dried cartridge, clogged nozzles, protective tape on a new cartridge, or a cartridge or ink bottle in the wrong slot.
- Check ink levels and make sure all protective tape is removed from new cartridges.
- Print the Nozzle Check page (or the printer’s built-in nozzle check) to see which ink is affected.
- Run one head cleaning, then check again. Do not run more than two or three in a row.
- If one color is replaced by another, check that each cartridge or ink bottle is in the right slot.
White lines or streaks across the page
Usual causes: On inkjets: clogged nozzles. On laser printers: low toner or a dirty or scratched drum. On thermal label printers: a dirty or dead print head dot.
- Inkjet: run the nozzle check and one head cleaning, then print the test page again.
- Laser: remove the toner cartridge and rock it gently side to side to spread the toner; clean the corona wire if your drum has one.
- Thermal: clean the print head with isopropyl alcohol and let it dry.
- If lines appear in exactly the same place after cleaning, a part (print head or drum) may need replacing.
Faded or light print
Usual causes: Draft or toner-save mode, low ink or toner, the wrong paper type setting, or partly clogged nozzles.
- In the print dialog, set quality to Normal or Best and turn off draft, economy or toner-save mode.
- Make sure the paper type in the dialog matches the paper in the tray.
- Check ink or toner levels, then run a nozzle check.
Smudges, ink spots or toner marks
Usual causes: Ink not dry before the next sheet lands, ink on the rollers or inside the printer, or on laser printers loose toner or a dirty fuser.
- Let prints dry before stacking them, and choose the right paper type so the printer uses the right amount of ink.
- Clean the paper rollers with a lint-free cloth and a little water.
- Marks repeating at the same distance down the page come from a roller or the drum — measure the gap and check your manual.
Page printed too small, too large or cut off
Usual causes: The print dialog is scaling the page, or the paper size setting does not match the paper.
- Set Scale to 100% or “Actual size”, and turn off “Fit to page” or “Shrink oversized pages”.
- Make sure the paper size in the dialog (Letter or A4) matches the paper in the tray.
- Print the Print Scale Test page and measure the rulers.
More test pages
Printer Test Page
Color Printer Test Page
Black and White Test Page
CMYK Test Page
Nozzle Check Page
Printer Alignment Test Page
Photo Test Print
Print Scale Test (Actual Size Check)
HP Printer Test Page
Epson Printer Test Page
Canon Printer Test Page
Label Printer Test Page
Weekly Inkjet Maintenance PageFrequently asked questions
How do I print a test page on a Brother printer?
Click Print above and choose your Brother, or print the built-in check sheet from the printer’s Ink or Machine Info menu.
My Brother laser prints with a gray background. Why?
A gray haze across the page usually means the drum unit is worn or the toner is not a good match. Try cleaning the corona wire (the green tab on the drum) and, if the haze stays, replace the drum unit.
Which test page should I use for a black-only Brother laser?
Use the Black and White Test Page. It has a 21-step gray scale and fine detail that matter on a mono laser printer.